Company Data: |
Date of Registration:0850919
Address:
Tel:(03)5678000
Fax:
|
|
|
|
Company Profile : |
Epistar Corporation, located in the Hsin-chu Science-based Park, Taiwan, is focused on developing, manufacturing and commercializing the Light Emitting Diode (LED) products.
Founded in September 1996, Epistar Corporation is now listed on the Taiwan Stock Exchange. It was awarded an "Outstanding R&D Enterprise Award" by the Taiwan Government in October, 2001. Its high brightness InGaN-based green LEDs have also been awarded as the Outstanding Photonics Product 2001.
Epistar has applied its special Metal Organic Vapor Phase Epitaxy (MOVPE) technology to the growth of AlGaInP and InGaN epi wafers. Combined with its advanced chip processing technology, Epistar provides high brightness red, orange, yellow, yellow-green, green, blue-green, blue and UV LED chips.
Located in the Hsin-chu Science-based Industrial Park, one of the major LED manufacturing sites in the world, Epistar has the advantage of reaching out and responding to its customers quickly. With the support of these customers, Epistar is moving toward the world-class leader in the LED manufacturing.
Epistar manufactures high brightness LEDs for cellular phone lighting, automotive interior and exterior lighting, LCD back lighting, outdoor displays, traffic signals and indicators for various electronic equipment. Epistar's high-speed LEDs are also being used as the lighting sources in the fiber-optics data transmissions.
As a manufacture leader of the LED industry, Epistar is proud of its application of intellectual property rights and its achievements in regard to its patents. By the end of 2001, Epistar had 21 patents and 36 patents pending.
Epistar vows to be a partner for success to all of its customers. |
|
|
Innovation Product: |
 |
1.Making the LED backlight modules lighter and slimmer: No matter it is a 7-inch screen for automotive TV, 12- to 19-inch display panel or 20-inch or above LCD TV screen, a light and slim backlight module is a basic requirement. Currently the mix-light technology of LED backlight modules for LCD TVs can reach to 50mm approximately, but our products are capable for 30mm and have the potential to accomplish 20mm and below now. With the capability, the product application can cover the market of 7-inch screen and above, and the technology can keep evolving.
2.Modulization of optical, electrical and thermal functions: There are many bottlenecks in designing the large-size panels with point light sources for general LCD backlight module manufacturers. Many issues like circuit design and driving control, mechanical design of heat dissipation for high power LED and the arrangement for mix light with RGB point light source will have mutual effects and make the situations more complicated. Modulization of LED light sources will make the design of the LCD backlight modules easier and lower the barrier in designing the LCD backlight modules with LEDs.
3.Lowering the manufacturing cost of LED backlight modules and speeding up the commercialization: Though LED has high color purity, its characteristics like forward voltage, wavelength and brightness will be varied based on the difference of epitaxy process of luminant materials. Since a LCD backlight module requires a uniform light source distribution in surface, there are strict classifications for LEDs used in LCD backlight modules, such as "wavelength +/- 2nm". The LEDs which fit the strict classifications are two or more times expensive than those meet the general classification like "wavelength +/- 5nm". Our products can be used within fine zone for complementary mix-light mechanism so the LEDs fitting the general requirement can be adopted to the backlight modules. Therefore, the manufacturing cost is lowered dramatically and the time to face the market is shortened.
4.Improving product reliability by adopting light pattern design: In LCD backlight module designs, if LEDs fail, it might form dark areas because LEDs are highly orientated, and the yield of the LCD backlight module is decreased. To avoid the formation of dark area by failed LEDs, there are two designs: one is Luxeon Direct of Lumileds, and the other is our product. The user of Luxeon Direct has to acquire the license from Lumileds and follow its specification, which will increase the cost substantially and menace the ability to control the key components of the domestic backlight module industry. Our product has related patents in many countries and independent backlight module design ability, and can resolve the problems for our customers. |
|
|
R&D Engineers: |
 Carson, Myway, Arvin, Water, Crystals, CJC, Iam
|
|