Company Data: |
Date of Registration:0850919
Address:
Tel:(03)5678000
Fax:
|
|
|
|
Company Profile : |
From Seeing the Light to Guiding the Light In 1996, a handful of visionaries founded Epistar to usher in the LED era, decades before solid state lighting became today’s ubiquitous commodity and highly-anticipated lighting source. First-hand knowledge and insight led the fledgling Epistar to pursue cutting-edge production and engineering innovation in epitaxy. And with accumulated expertise and expansive capacity, today Epistar sits firmly as the premier global supplier. Epistar has already worked with some of the most well-known brands around the world, popularizing LED applications on cell phone screens, laptops, television, and much more. Thus Epistar is able to inject the benefits of solid state lighting into everyday life. The singular vision that has powered Epistar from the beginning also contains insights into client-supplier relationship. Epistar has always believed that, in the tightly-interwoven LED industry, working closely with clients is critical to producing the highest quality end- products. That is why Epistar has developed a unique “Co-Activation Service Model,” working alongside clients as their partner, co-designing chips and production processes, while perfecting quality control. Through such close-knit partnerships, Epistar is able to truthfully gauge the diverse needs of downstream businesses and consumers, and in essence, satisfy every Epistar partner’s client. Epistar’s pivotal role in LED’s full commercialization has guided the world into the solid state lighting era. Today that era is fast approaching full-bloom, and Epistar is more equipped than ever to take on increasingly challenging feats, to help illuminate the world in a better light.
|
|
|
Innovation Product: |
 |
LED Planar Light Source by Lens-less Design
Introduction: External 2nd Lens is indispensable to change the optical path while the light passing through, the example of adding condensed lens is shown as Figure 1(a), and optical pattern is shown as Figure 1(b). Moreover, the example of adding divergent lens is shown as Figure 2(a), and optical pattern is shown as Figure 2(b). So far, the direct-type backlighting module adopts the LED package with 2nd lens to distribute the optical pattern to be side-emitting way, and match up with diffuser plate to make light more uniform. However, this approach will increase the cost of external 2nd lens and alignment of placing over package. Therefore, we develop a new mothod to change the optical pattern by inserting an optical thin film inside the LED device, and achieving the equivalent effect of adding external 2nd lens. Meanwhile, the optical pattern is also adjustable to fit the similar effect of side-emitting. Hence, it can be greatly reduce the fabrication and engineering cost.
Feature 1.Technology: Uniqueness No need for external 2nd lens, and the alignment cost can be saved Leading edge Optical pattern can be as broad as 180 degree planar light (ex., Cree XQB is 135~140 degree) Core capability Optical thin film design capability, ELC device process technology Key component All BOM materials are provided by existing supply chain,and the key ELC package is 100% fabricated by Epistar
2.Innovation Functionality This product design is not only applied in direct-type backlight module, but also applied in omni-directional light fixture, planar light source with better feel by human eyes while seeing at the front side. Improvement The similar effect of side-emitting optical pattern can be achieved without 2nd lens, and the complicated alignment process over LED package can be spared. 3.Market Applicability The number of LED packages for backlight module can reduce 50% amount, and the power consumption is also saved 50% up. Potential The luminous efficiency can be over 80 lm/W (optical flux 100 Lm) at CCT = 5,700K; CIE( x,y )= (0.265, 0.235) under 400 mA driving current. Strategy This product is successfully introduced into the LCD TV brand maker as BLU C/P ratio Single ELC-BD package C/P ratio is 1,500 Lm/$ (Lumen/US dollar)
4. Overall design At present direct-type backlight module, the pitch < 5 cm arrangement over diffuser plate exhibits the uniform and symmetric distribution.
|
|
|
R&D Engineers: |
 R & D investment R & D budget: at least 5.0% of annual revenues R & D personnel: up to 5.0% of total employees R & D organizations Establish R & D center to integrate R & D resources Each operation center has individual epitaxy and LED chip engineering department to be in charge of performance and quality improvement, also reducing the manufacturing cost R & D human resource 200 R & D staffs Over 80% of R & D staffs with MS and/or Ph. D degrees
|
|